Which utility serves Beloit?

The research identifies Alliant Energy (Wisconsin Power and Light) as the delivery utility serving Beloit. Confirm your facility's utility from its bill or service address; postal addresses and service boundaries can differ.

Territory source: Alliant Energy (Wisconsin Power and Light) territory listing.

The power-factor rule

Alliant Energy (Wisconsin Power and Light) Power-factor rule confirmed

Only the very large Cp-2 transmission schedule has a reactive-energy charge in the schedules we reviewed; WPL's General Rules were not checked.

Cp-2 Industrial Power at Transmission Voltage, time-of-use. Applies to: Loads of 5 MW or more that can be served at 69 kV or higher (limited exceptions). Reactive energy above the level that corresponds to a 90% power factor is charged; a power factor above 90% earns a credit. Billed reactive energy = rkVAh − (kWh × 0.484), at $0.001015 per rkVAh. (0.484 is about tan(arccos 0.90); that equivalence is our calculation.)

Not established WPL General Rules (Sheet 40.00). Applies to: All customers. Not reviewed. The rate-book PDF did not include the General Rules, so we cannot say whether they contain a power-factor requirement.

WPL's General Rules volume was not checked.

As checked 2026-10-03. Alliant Energy (Wisconsin Power and Light)'s full rules, tariff quotes and sources →

Is correction worth it in Beloit?

Correction may reduce the applicable adjustment. The result depends on the schedule's measurement basis, minimums, ratchets and credit provisions; check the bill before assigning a benefit.

Size the kVAR for your load →

Working with us in Beloit

Beloit is about 60 miles from our Brookfield office, measured straight-line. Send your bills and available measurement data to discuss the appropriate next step and whether site work can be arranged.

Send us a bill 1-800-FIX-KVAR

Nearby

Janesville, WI · Rockford, IL · Crystal Lake, IL · Madison, WI · all service areas

Power factor correction in Beloit, WI